Melatonin ameliorates chronic copper-induced lung injury

Environmental Science and Pollution Research - Copper (Cu) is an important trace element required for several biological processes. The use of copper is increasing gradually in several...     

Morphological,physiological and biochemical responses of two Australian biotypes of Parthenium hysterophorus to different soil moisture regimes

Parthenium weed is a problematic invasive species in several countries around the world. Although it is considered to be a highly invasive species within Australia, not all biotypes of parthenium weed exhibit the same ability in regard to aggressive colonization and distribution. Differences among biotypes, particularly in regard to environmental ranges as a possible basis for this variation, have not always been elucidated. To determine whether drought tolerance could be a factor in biotype demographics, we quantified the biological responses of two Australian parthenium weed biotypes known to differ in invasive ability Clermont (“high”) and Toogoolawah (“low”) to 100, 75 and 50% of soil water holding capacity (WHC). The Clermont biotype had greater vegetative growth, seed production and chlorophyll content than Toogoolawah, across all moisture levels. Net photosynthesis, stomatal conductance, internal CO₂ concentration, seed production per plant, 1000 seed weight and subsequent germination percentage were also higher for Clermont than for Toogoolawah and were maximum at 75% WHC. Clermont plants also had higher total soluble sugar, phenolics and free proline content than Toogoolawah, and a significant increase in the levels of all of these biochemicals was observed at 50% WHC. In conclusion, Clermont grew and reproduced better than Toogoolawah across all moisture regimes consistent of enhanced invasive ability of this biotype. Overall, the ability of parthenium weed to maintain good growth, physiology and seed production under moisture stress may enable it to colonize a wide range of Australian environments.

     

Challenges in developing strategies for the valorization of lignin—a major pollutant of the paper mill industry

Environmental Science and Pollution Research - Apart from protecting the environment from undesired waste impacts, wastewater treatment is a crucial platform for recovery. The exploitation of...     

Evaluation of existing equations for temporal scour depth around circular bridge piers

Scour is defined as the processes of removal of sediment particles from water stream bed by the erosive action of activated water, and also carries sediment away from the hydraulic structures. Scour is the main cause of pier failure. Numerous equations are available for estimating temporal and equilibrium scour depth. The present study describes the phenomenon of temporal scour depth variation at bridge piers and deals with the methods for its estimation. The accuracy of six temporal scour depth equations are also checked in this study. After graphical and statistical analysis, it was found that the relationship proposed by Oliveto and Hager (J Hydraul Eng (ASCE) 128(9):811–520, 2002) predicts temporal scour depth better than other equations. Three equations of equilibrium time of scour are also used for computing equilibrium time. Equilibrium time equation proposed by Choi and Choi (Water Environ J 30(1–2):14–21, 2016) gives better agreements with observed values.     

Persistence of chlorantraniliprole granule formulation in sugarcane field soil

Chlorantraniliprole, an anthranilic diamide insecticide with novel mode of action, is found effective against several lepidopteran as well as coleopteran, dipteran, and hemipteran pests. The present studies were carried out to study the persistence pattern of chlorantraniliprole on sugarcane field soil following application of granule formulation. The residues of chlorantraniliprole were estimated using high performance liquid chromatograph (HPLC) and confirmed by liquid chromatograph-mass spectrometry (LC-MS/MS). Following application of chlorantraniliprole (Ferterra 0.4G) at 100 and 200 g a.i. ha^?1, the average initial deposits of chlorantraniliprole were observed to be 0.88 and 1.59 mg kg^?1, respectively. These residues dissipated below the limit of quantification (LOQ) of 0.01 mg kg^?1 after 56 days of the application of insecticides at both the dosages. The half-life values (t _1/2) of chlorantraniliprole were worked out to be 8.36 and 8.25 days, at recommended and double the recommended dosages, respectively.     

Assessment of imidacloprid degradation by soil-isolated Bacillus alkalinitrilicus

Imidacloprid is extensively used on a broad range of crops worldwide as seed dressing, soil treatment, and foliar application. Hence, the degradation potential of bacterial strains from sugarcane-growing soils was studied in liquid medium for subsequent use in bioremediation of contaminated soils. The microbe cultures degrading imidacloprid were isolated and enriched on Dorn’s broth containing imidacloprid as sole carbon source maintained at 28 °C and Bacillus alkalinitrilicus showed maximum potential to degrade imidacloprid. Clay loam soil samples were fortified with imidacloprid at 50, 100, and 150 mg kg^?1 along with 45?×?10⁷ microbe cells under two opposing sets of conditions, viz., autoclaved and unautoclaved. To study degradation and metabolism of imidacloprid under these two conditions, samples were drawn at regular intervals of 7, 14, 28, 35, 42, 49, and 56 days. Among metabolites, three metabolites were detected, viz., 6-chloronicotinic acid, nitrosimine followed by imidacloprid-NTG under both the conditions. Total imidacloprid residues were not found to follow the first-order kinetics in both types of conditions. This paper reports for the first time the potential use of pure cultures of soil-isolated native bacterium B. alkalinitrilicus and also its use along with natural soil microflora for remediation of imidacloprid-contaminated soils.     

Molasses-based growth and lipid production by Chlorella pyrenoidosa: A potential feedstock for biodiesel

Biodiesel provides a feasible solution to the twin crisis of energy security and environmental concerns prevalent today, and it can be extracted from conventional oil crops as well as microalgae. However, lipid productivity in case of microalgae is much higher and has several advantages as compared with crop plants, so it is a better feedstock for biodiesel. In case of Chlorella pyrenoidosa, the heterotrophic cultured cells were found to be better in terms of lipid production, and ultimately biodiesel production, but the bottleneck is that in this mode glucose is used to feed the cells, which amounts to almost 80% of the total cost of biodiesel production. The purpose of this study is to evaluate and highlight the feasibility of using the industrially cheap cane molasses as a carbon source in place of glucose for a large-scale, low-cost lipid production of Chlorella pyrenoidosa. When treated molasses was used as a carbon source instead of glucose, the biomass sharply increases from 0.89 to 1.22 g L^–1. On the other hand, the total lipid content increases from 0.27 to 0.66 g g^–1. The specific growth rate and yield was higher in treated molasses as compared with that in glucose-supplemented. A mathematical model was also developed based on logistic, Luedeking–Piret, and Luedeking-Piret-like equations. Model predictions were in satisfactory agreement with the measured data, and the mode of lipid production was growth-associated.     

Removal of hexavalent chromium upon interaction with biochar under acidic conditions: mechanistic insights and application

Environmental Science and Pollution Research - Chromium pollution of soil and water is a serious environmental concern due to potential carcinogenicity of hexavalent chromium [Cr(VI)] when...     

Emerging trends in photodegradation of petrochemical wastes: a review

Various human activities like mining and extraction of mineral oils have been used for the modernization of society and well-beings. However, the by-products such as petrochemical wastes generated from such industries are carcinogenic and toxic, which had increased environmental pollution and risks to human health several folds. Various methods such as physical, chemical and biological methods have been used to degrade these pollutants from wastewater. Advance oxidation processes (AOPs) are evolving techniques for efficient sequestration of chemically stable and less biodegradable organic pollutants. In the present review, photocatalytic degradation of petrochemical wastes containing monoaromatic and poly-aromatic hydrocarbons has been studied using various heterogeneous photocatalysts (such as TiO₂, ZnO and CdS. The present article seeks to offer a scientific and technical overview of the current trend in the use of the photocatalyst for remediation and degradation of petrochemical waste depending upon the recent advances in photodegradation of petrochemical research using bibliometric analysis. We further outlined the effect of various heterogeneous catalysts and their ecotoxicity, various degradation pathways of petrochemical wastes, the key regulatory parameters and the reactors used. A critical analysis of the available literature revealed that TiO₂ is widely reported in the degradation processes along with other semiconductors/nanomaterials in visible and UV light irradiation. Further, various degradation studies have been carried out at laboratory scale in the presence of UV light. However, further elaborative research is needed for successful application of the laboratory scale techniques to pilot-scale operation and to develop environmental friendly catalysts which support the sustainable treatment technology with the “zero concept” of industrial wastewater. Nevertheless, there is a need to develop more effective methods which consume less energy and are more efficient in pilot scale for the demineralization of pollutant.